JVM Operations Manual

Running the Graal compiler in Native Image vs on the JVM

When running the Graal compiler on the JVM, it goes through the same warm-up phase that the rest of the Java application does. That is, it is first interpreted before its hot methods are compiled. This can translate into slightly longer times until the application reaches peak performance when compared to the native compilers in the JVM such as C1 and C2.

To address the issue of taking longer to reach to peak performance, libgraal was introduced – a shared library, produced using Native Image to ahead-of-time compile the compiler itself. That means the Oracle GraalVM compiler is deployed as a native shared library.

In this mode, the compiler uses memory separate from the HotSpot heap, and it runs compiled from the start. Therefore it has execution properties similar to other native HotSpot compilers such as C1 and C2. Currently, this is the default mode of operation. It can be disabled with -XX:-UseJVMCINativeLibrary.

Measuring Performance

The first thing to be sure of when measuring performance is to ensure the JVM is using the Oracle GraalVM compiler. In the GraalVM binary, the JVM is configured to use the Graal compiler as the top tier compiler by default. You can confirm this by adding -Dgraal.ShowConfiguration=info to the command line. It will produce a line of output similar to the one below when the compiler is initialized:

Using "Graal Community compiler" loaded from class files

Note: The Graal compiler is only initialized on the first top-tier JIT compilation request so if your application is short-lived, you may not see this output.

Optimizing JVM-based applications is a science in itself. The compilation may not even be a factor in the case of poor performance as the problem may lie in any other part of the VM (I/O, garbage collection, threading, etc), or in a poorly written application or 3rd party library code. For this reason, it is worth utilizing the JDK Mission Control tool chain to diagnose the application behavior.

You can also compare performance against the native top-tier compiler in the JVM by adding -XX:-UseJVMCICompiler to the command line.

If you observe a significant performance regression when using the Graal compiler, please open an issue on GitHub. Attaching a Java Flight Recorder log and instructions to reproduce the issue makes investigation easier and thus the chances of a fix higher. Even better is if you can submit a JMH benchmark that represents the hottest parts of your application (as identified by a profiler). This allows us to very quickly pinpoint missing optimization opportunities or to offer suggestions on how to restructure the code to avoid or reduce performance bottlenecks.

Troubleshooting the Graal compiler

Like all software, the Graal compiler is not guaranteed to be bug free so it is useful to know how to diagnose and submit useful bug reports if you encounter issues.

If you spot a security vulnerability, please do not report it via GitHub Issues or the public mailing lists, but via the process outlined at Reporting Vulnerabilities guide.

Compilation Exceptions

One advantage of the compiler being written in Java is that runtime exceptions during compilation are not fatal VM errors. Instead, each compilation has an exception handler that takes action based on the graal.CompilationFailureAction property.

The default value is Silent. Specifying Diagnose causes failing compilations to be retried with extra diagnostics enabled. In this case, just before the VM exits, all diagnostic output captured during retried compilations is written to a .zip file and its location is printed on the console:

Graal diagnostic output saved in /Users/demo/graal-dumps/1499768882600/graal_diagnostics_64565.zip

You can then attach the .zip file to an issue on GitHub.

Apart from Silent and Diagnose, the following values for graal.CompilationFailureAction are also supported:

Print: prints a message and stack trace to the console but does not perform the re-compilation.
ExitVM: same as Diagnose but the VM process exits after the re-compilation.

Code Generation Errors

The other type of error you might encounter with compilers is the production of incorrect machine code. This error can cause a VM crash, which should produce a file that starts with hs_err_pid in the current working directory of the VM process. In most cases, there is a section in the file that shows the stack at the time of the crash, including the type of code for each frame in the stack, as in the following example:

Stack: [0x00007000020b1000,0x00007000021b1000],  sp=0x00007000021af7a0,  free space=1017k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
J 761 JVMCI org.graalvm.compiler.core.gen.NodeLIRBuilder.matchComplexExpressions(Ljava/util/List;)V (299 bytes) @ 0x0000000108a2fc01 [0x0000000108a2fac0+0x141] (null)
j  org.graalvm.compiler.core.gen.NodeLIRBuilder.doBlock(Lorg/graalvm/compiler/nodes/cfg/Block;Lorg/graalvm/compiler/nodes/StructuredGraph;Lorg/graalvm/compiler/core/common/cfg/BlockMap;)V+211
j  org.graalvm.compiler.core.LIRGenerationPhase.emitBlock(Lorg/graalvm/compiler/nodes/spi/NodeLIRBuilderTool;Lorg/graalvm/compiler/lir/gen/LIRGenerationResult;Lorg/graalvm/compiler/nodes/cfg/Block;Lorg/graalvm/compiler/nodes/StructuredGraph;Lorg/graalvm/compiler/core/common/cfg/BlockMap;)V+65

This example shows that the top frame was compiled (J) by the JVMCI compiler, which is the Graal compiler. The crash occurred at offset 0x141 in the machine code produced for:

org.graalvm.compiler.core.gen.NodeLIRBuilder.matchComplexExpressions(Ljava/util/List;)V

The next two frames in the stack were executed in the interpreter (j). The location of the crash is also often indicated near the top of the file with something like this:

# Problematic frame:
# J 761 JVMCI org.graalvm.compiler.core.gen.NodeLIRBuilder.matchComplexExpressions(Ljava/util/List;)V (299 bytes) @ 0x0000000108a2fc01 [0x0000000108a2fac0+0x141] (null)

In this example, there is likely an error in the code produced by the Graal compiler for NodeLIRBuilder.matchComplexExpressions.

When filing an issue on GitHub for such a crash, you should first attempt to reproduce the crash with extra diagnostics enabled for the compilation of the problematic method. In this example, you would add the following to your command line:

-Dgraal.MethodFilter=NodeLIRBuilder.matchComplexExpressions, -Dgraal.Dump=:2

These options are described in more detail here. In brief, these options tell the compiler to capture snapshots of the compiler state at verbosity level 2 while compiling any method named matchComplexExpressions in a class with a simple name of NodeLIRBuilder. The complete format of the MethodFilter option is described in the output of java -XX:+JVMCIPrintProperties.

Quite often, the crash location does not exist directly in the problematic method mentioned in the crash log but comes from an inlined method.

In such a case, simply filtering for the problematic method might not capture an erroneous compilation causing a crash.

To improve the likelihood of capturing an erroneous compilation, you need to broaden the MethodFilter value. To guide this, add -Dgraal.PrintCompilation=true when trying to reproduce the crash so you can see what was compiled just before the crash.

The following shows sample output from the console:

HotSpotCompilation-1218        Lorg/graalvm/compiler/core/amd64/AMD64NodeLIRBuilder;                  peephole                                      (Lorg/graalvm/compiler/nodes/ValueNode;)Z           |   87ms   428B   447B  1834kB
HotSpotCompilation-1212        Lorg/graalvm/compiler/lir/LIRInstructionClass;                         forEachState                                  (Lorg/graalvm/compiler/lir/LIRInstruction;Lorg/graalvm/compiler/lir/InstructionValueProcedure;)V  |  359ms    92B   309B  6609kB
HotSpotCompilation-1221        Lorg/graalvm/compiler/hotspot/amd64/AMD64HotSpotLIRGenerator;          getResult                                     ()Lorg/graalvm/compiler/hotspot/HotSpotLIRGenerationResult;  |   54ms    18B   142B  1025kB
#
# A fatal error has been detected by the Java Runtime Environment:
#
#  SIGSEGV (0xb) at pc=0x000000010a6cafb1, pid=89745, tid=0x0000000000004b03
#
# JRE version: OpenJDK Runtime Environment (8.0_121-b13) (build 1.8.0_121-graalvm-olabs-b13)
# Java VM: OpenJDK 64-Bit GraalVM (25.71-b01-internal-jvmci-0.30 mixed mode bsd-amd64 compressed oops)
# Problematic frame:
# J 1221 JVMCI org.graalvm.compiler.hotspot.amd64.AMD64HotSpotLIRGenerator.getResult()Lorg/graalvm/compiler/hotspot/HotSpotLIRGenerationResult; (18 bytes) @ 0x000000010a6cafb1 [0x000000010a6caf60+0x51] (null)
#
# Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again

Here we see that the crash happened in a different method than the first crash. As such, we expand the filter argument to be -Dgraal.MethodFilter=NodeLIRBuilder.matchComplexExpressions,AMD64HotSpotLIRGenerator.getResult and run again.

When the VM crashes in this way, it does not execute the shutdown code that archives the Graal compiler diagnostic output or delete the directory it was written to. This must be done manually after the crash.

By default, the directory is $PWD/graal-dumps/<timestamp>; for example, ./graal-dumps/1499938817387. However, you can set the directory with -Dgraal.DumpPath=<path>.

A message, such as the following, is printed to the console when this directory is first used by the compiler:

Dumping debug output in /Users/demo/graal-dumps/1499768882600

This directory should contain content related to the crashing method, such as:

ls -l /Users/demo/graal-dumps/1499768882600
-rw-r--r--  1 demo  staff    144384 Jul 13 11:46 HotSpotCompilation-1162[AMD64HotSpotLIRGenerator.getResult()].bgv
-rw-r--r--  1 demo  staff     96925 Jul 13 11:46 HotSpotCompilation-1162[AMD64HotSpotLIRGenerator.getResult()].cfg
-rw-r--r--  1 demo  staff  12600725 Jul 13 11:46 HotSpotCompilation-791[NodeLIRBuilder.matchComplexExpressions(List)].bgv
-rw-r--r--  1 demo  staff   1727409 Jul 13 11:46 HotSpotCompilation-791[NodeLIRBuilder.matchComplexExpressions(List)].cfg